CH4X Green, -12 °C/-32°C, 60g
CH5X Turquoise, -8 °C/-14°C, 60g
CH6X Blue, -5 °C/-10°C, 60g
CH7X Violet, -2 °C/-8°C, 60g
CH8X Red, -4°C/4°C, 60g
CH10X Yellow, 0 °C/10°C, 60g
CH4X Green, -12 °C/-32°C, 60g (CH04X-6)
Temperature range from -12°C to -32°C (10°F to -25°F). Recommended iron temp: 155°C (311°F). A new cold hydrocarbon wax for extreme cold conditions, which can perfectly be used alone as a race wax when the air humidity is low. It performs very well on artificial snow and has a great durability. The speed of the iron should be approx. 8-10 sec. on a skating or alpine ski. The wax can be re-heated after cooling to room temperature (10 min) for better durability. Scraping after appr. one minute. Important to have a good iron to get an efficient melting of the wax. Scraping after appr, one minute. In the warmer part of the temperature range, and when high air humidity, Cera F powder, such as FC04X will increase the performance.
CH5X Turquoise, -8 °C/-14°C, 180g (CH05X-18)
Temperature range from -8°C to -14°C (18°F to 7°F). Recommended iron temp: 150°C (311°F). The 5 series is brand new for the Cera Nova X line, and fulfill a hardness gap between the 4 and the 6 series. It’s easier to apply than the 4 series, but provides outstanding glide properties within its temperature range, and has a great durability. The speed of the iron should be approx. 8-10 sec. on a skating or alpine ski. The wax can be re-heated after cooling to room temperature (10 min) for better durability. Scraping after appr. one minute. Important to have a good iron to get an efficient melting of the wax. Scraping after appr, one minute. CH05X can be used as a race wax alone, but is often used as a base for Cera F powder, such as FC05X.
CH5X Turquoise, -8 °C/-14°C, 60g (CH05X-6)
Temperature range from -8°C to -14°C (18°F to 7°F). Recommended iron temp: 150°C (311°F). The 5 series is brand new for the Cera Nova X line, and fulfill a hardness gap between the 4 and the 6 series. It’s easier to apply than the 4 series, but provides outstanding glide properties within its temperature range, and has a great durability. The speed of the iron should be approx. 8-10 sec. on a skating or alpine ski. The wax can be re-heated after cooling to room temperature (10 min) for better durability. Scraping after appr. one minute. Important to have a good iron to get an efficient melting of the wax. Scraping after appr, one minute. CH05X can be used as a race wax alone, but is often used as a base for Cera F powder, such as FC05X.
CH6X Blue, -5 °C/-10°C, 60g (CH06X-6)
Temperature range from -5°C to -10°C (23°F to 14°F). Recommended iron temp: 145°C (293°F). Our std. CH6 has been a success in the Cera Nova system, and through comprehensive testing we have not found anything better. It is an economic training and racing wax as well as a base prep wax for cold skis. CH06X has high durability and offer great performance in most snow conditions as well as on artificial and glacier snow. The speed of the iron should be approx. 8-10 sec. on a skating or alpine ski. The wax can be re-heated after cooling to room temperature (10 min) for better durability. Important to have a good iron to get an efficient melting of the wax.
CH7X Violet, -2 °C/-8°C, 60g (CH07X-6)
Temperature range from -2°C to -8°C (28°F to 18°F). Recommended iron temp: 140°C (284°F). A new and improved wax that performs great in normal winter conditions below the freezing point. Its hardness makes it convenient to work with and easy to get a good end-result. It is an economic training and racing wax as well as an all round base prep wax. The speed of the iron should be approx. 8-10 sec. on a skating or alpine ski. The wax can be re-heated after cooling to room temperature (10 min) for better durability. Important to have a good iron to get an efficient melting of the wax.
CH8X Red, -4°C/4°C, 60g (CH08X-6)
Temperature range from -4°C to 4°C (25°F to 39°F). Recommended iron temp: 130°C (266°F). A continuation of the std. CH8. An economic training and racing wax as well as base prep wax for warm skis. Easy to melt and very convenient to work with. The speed of the iron should be approx. 8-10 sec. on a skating or alpine ski. The wax can be re-heated after cooling to room temperature (10 min) for better durability. Important to have a good iron to get an efficient melting of the wax.
Item Number:
1936-71
Item ID:
61623
Category:
Tuning Supplies
